Reference Guide

Table Of Contents
456 | remote-node-profile Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide
Usage Guidelines
Use the remote-node-profile command to create a Remote Node profile. You define configuration settings for
each Remote Node through a Remote Node profile on the Remote Node-master. The Remote Node-master must
be a master controller.
validate After you have defined configuration settings for a Remote Node profile,
you must activate that profile by issuing the command remote-node-
profile <profile-name> validate to validate that the configuration has a
correctly defined uplink, model type, and an interface type supported by
the Remote Node model.
You cannot assign a Remote Node configuration profile to a Remote
Node until that profile has been activated.
vlan Create a Remote Node VLAN Virtual Interface vlan. For details on using
this command, see “vlan” on page 1274.
vrrp Define a Virtual Router Redundancy Protocol (VRRP) configuration. For
details on using this command, see “vrrp” on page 1292.
Parameter Description