Reference Guide

Table Of Contents
376 | local-userdb-remote-node Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide
local-userdb-remote-node
localuserdb
local-userdb-remote-node add mac-address <mac-address> remote-node-profile
<remote-node-profile>
del mac-address <mac-address>
Description
This command adds a Remote Node to the Remote Node whitelist. You can also delete the whitelist entry using
this command.
Syntax
Usage Guidelines
A Remote Node-master can only assign a configuration profile to a Remote Node in its Remote Node whitelist.
To assign a different configuration to an unprovisioned Remote Node, you must delete the whitelist entry and
create a new Remote Node whitelist entry with the correct Remote Node configuration profile. A remote-node
profile has to be validated before it is configured and pushed to a Remote Node.
Example
This example adds the Remote Node profile named Location-1 to the Remote Node whitelist.
(remote-node-master) #local-userdb-remote-node add mac-address 00:16:CF:AF:3E:E1
remote-node-profile Location_1
This example removes a Remote Node from the Remote Node whitelist.
(remote-node-master)(config) #local-userdb-remote-node del mac-address 00:16:CF:AF:3E:E1
Parameter Description Range Default
mac-address <mac-
address>
MAC address of the Remote Node in colon-separated six-
octet format.
——
remote-node-profile
<remote-node-
profile>
The Remote Node configuration profile to be assigned to that
Remote Node.
1–64
characters