Reference Guide

Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide ip dhcp excluded-address | 309
ip dhcp excluded-address
ip dhcp excluded-address <low-ipaddr> [<high-ipaddr>]
Description
This command configures an excluded address range for the DHCP server on the controller.
Syntax
Usage Guidelines
Use this command to specifically exclude certain addresses from being assigned by the DHCP server. It is good
practice to exclude any statically assigned addresses.
Example
The following command configures an excluded address range:
ip dhcp excluded-address 192.168.1.1 192.168.1.255
Command History
Introduced in ArubaOS 3.0
Command Information
Parameter Description
<low-ipaddr> Low end of range of IP addresses. For example, you can enter the IP address of the controller so that
this address is not assigned.
<high-ipaddr> High end of the range of IP addresses.
Platform License Command Mode
Available on all platforms Available in base operating system Config mode on master
controllers