Reference Guide

Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide ids ap-classification-rule | 249
ids ap-classification-rule
id-classification-rule <rule-name>
check-min-discovered-aps
classify-to-type [neighbor | suspected-rogue]
clone
conf-level-incr
discovered-ap-cnt <discovered-ap-cnt>
match-ssids
no
snr-max <value>
snr-min <value>
ssid <ssid>
Description
Configure the AP classification rule profile.
Syntax
Usage Guidelines
AP classification rule configuration is performed only on a master controller. If AMP is enabled via the mobility-
manager command, then processing of the AP classification rules is disabled on the master controller. A rule is
identified by its ASCII character string name (32 characters maximum). The AP classification rules have one of
the following specifications:
 SSID of the AP
 SNR of the AP
 Discovered-AP-Count or the number of APs that can see the AP
Parameter Description Range Default
<rule-name> Enter the AP classification rule profile name. — —
check-min-discovered-aps Have the rule check for the minimum number of
APs
true
false
true
classify-to-type
[neighbor | suspected-rogue]
Specify if the type the AP is classified, neighbor or
suspected-rogue, if the rule is matched.
— suspected-
rogue
clone Copy data from another AP classification rule
profile
——
conf-level-incr Increase the confidence level (in percentage)
when the rule matches
0-100 5
discovered-ap-cnt
<discovered-ap-cnt>
Enter the keyword discovered-ap-cnt followed by
the number of APs to be discovered.
0-100 0
match-ssids Match SSIDs; match or do not match true
false
false
no Negates any configured parameter — —
snr-max <value> Use the maximum SNR value 0-100 0
snr-min <value> Use the minimum SNR value 0-100 0
ssid <ssid> Enter the keyword ssid followed by the SSID string
to be matched or excluded
——