Reference Guide

Table Of Contents
218 | destination Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide
destination
destination <STRING> <A.B.C.D> [invert]
Description
This command configures the destination name and address.
Syntax
Usage Guidelines
You can configure the name and IP address of the destination. You can optionally configure the subnet, or invert
the selection.
Example
The following example configures a destination called “Home” with an IP address of 10.10.10.10.
(host) (config) #destination Home 10.10.10.10
Command History
Command Information
Parameter Description Range
STRING
Destination name. Alphanumeric
A.B.C.D
Destination IP address or subnet.
invert
Specifies all destinations except this one.
Release Modification
ArubaOS 1.0 Command introduced
ArubaOS 3.0 Replaced with netdestination command.
Availability License Command Mode
Can be used only on the master
controller.
Requires the PEF NG license Config mode on master controllers