Reference Guide

1340 | wms client Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide
wms client
wms client <macaddr> mode {manually-contain|interfering|valid}
Description
This command allows you to classify a wireless client into one of several categories.
Syntax
Usage Guidelines
ArubaOS can automatically determine client classification based on client behavior, but this command allows
you to explicitly classify a client. The classification of a client is used in certain policy enforcement features. For
example, if protect-valid-sta is enabled in the IDS Unauthorized Device Profile, then clients that are classified as
valid cannot connect to non-valid APs.
Example
The following command classifies a client as valid:
(host) #wms client 00:00:A4:34:C9:B3 mode valid
Command History
Command Information
Parameter Description
client MAC address of the client.
mode Classify the client into one of the following categories:
manually-contain Manualy enable denial of service to this client.
interfering Setting the client mode to interfering makes it part of clients outside the enterprise
valid A client that is part of the enterprise.
Release Modification
ArubaOS 3.0 Command introduced
ArubaOS 6.1 The following parameters were deprecated
dos
neighbor
The following parameters were introduced:
manually-contain
interfering
Platforms Licensing Command Mode
All platforms Base operating system Enable mode on master controllers