Users Guide

Controller-2 Configuration
(Controller-2) (config) # interface tunnel 204
description “IPv4 L3 GRE 204"
tunnel mode gre ip
ip address 1.1.1.2 255.255.255.255
tunnel source vlan 20
tunnel destination 10.10.10.249
trusted
Configuring a Layer-3 GRE Tunnel for IPv6
In the WebUI
To configure a Layer-3 GREtunnel for IPv6 via the WebUI:
Controller-1
1. Log into Controller-1.
2. Navigate to Configuration > Network > IP > GRE Tunnels.
The GRE Tunnels page appears.
3. Highlight the line for the tunnel ID of interest and click Edit.
The Edit GRE Tunnel screen appears.
Figure 28 displays the values that would be entered into the Edit GRE Tunnel screen to configure
Controller-1 based on the network shown in Figure 21 .
Figure 28 Layer-3 IPv6 GRE Tunnel UI Configuration for Controller-1
4. Enter the corresponding GRE tunnel values for this controller.
Dell Networking W-Series ArubaOS 6.4.x | User Guide Network Configuration Parameters | 188