Release Notes

show ap arm virtual-beacon-report
show ap arm virtual-beacon-report
ap-name <name>
ip-addr <ipaddr>
ip6-addr <ip6-addr>
phy-type 80211a|80211b|80211g
Description
If the client match feature is enabled, the output of this command displays the virtual beacon report for an
APwith a specific IP or MAC address.
Syntax
Parameter Description
ap-name <name>
Name of an AP for which you want to view a virtual beacon report.
ip-addr <ipaddr>
IPv4 address of an AP for which you want to view a virtual beacon report.
ip6-addr <ipv6addr>
IPv6 address of an AP for which you want to view a virtual beacon report.
phy-type
Display virtual beacon report data for an AP radio with one of the following phy
types:
l 80211a
l 80211b
l 80211g
Usage Guidelines
If the client match feature is enabled, the controller sends APs a list of clients that should not be allowed to
associate to that AP.
Example
(host)#) #show ap arm virtual-beacon-report ap-name 1341-AP78
Interface:wifi0
Rx VBR Reports:562
Client MAC:24:77:03:32:83:ac
Dual band:Yes
Current Association:d8:c7:c8:37:84:70
Virtual Beacon Report
---------------------
AP Channel Signal (dBm) Clients Assoc
-- ------- ------------ ------- -----
d8:c7:c8:37:84:10 124 -42 12
d8:c7:c8:37:84:70 132 -51 2 Y
d8:c7:c8:88:b6:50 132 -47 6
The output of this command includes the following parameters:
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show ap arm virtual-beacon-report | 890