Release Notes

Parameter Description
called-station-id
Configure this parameter to be sent with the RADIUS attribute Called
Station ID for authentication and accounting requests.
The called-station-id parameter can be configured to include AP group,
AP MAC address, AP name, controller IP, controller MAC address, or user
vlan.
The default value is controller MAC address.
Include the optional statistics parameter in this command to display the following statistics for all RADIUS
servers:
Parameter Description
Server
Name of the RADIUS server.
Acct Rq
Accounting requests. This reports of the number of accounting messages (for
example, start/stop/interim update) sent by the controller to a RADIUS server.
This counter increments whenever the controller sends one of these messages.
Raw Rq
Raw requests. Number of raw authentication requests the controller sent to a
RADIUS server.
PAP Rq
Pap Requests. Number of PAP authentication requests the controller sent to a
RADIUS server.
CHAP Rq
CHAP requests. Number of CHAP authentication requests the controller sent to a
RADIUS server.
MSCHAP Rq
MSCHAP requests. Number of MS-CHAP authentication requests the controller
sent to a RADIUS server.
MSCHAPv2 Rq
MSCHAPv2 requests. Number of MS-CHAPv2 requests the controller sent to a
RADIUS server.
Mismatch Rsp
Mismatch responses. Number of responses from a RADIUS server for which the
controller does not have the proper request context.
Bad Auth
Bad authenticator. Number of responses from the RADIUS server with an invalid
secret or bad reply digest.
Acc
Access accept. Number of responses from the RADIUS server with invalid secret
or bad reply digest.
Rej
Access reject. Number of responses from the RADIUS server that indicate that cli-
ent authentication failed.
Acct Rsp
Accounting response. Number of responses sent from the RADIUS server in
response to accounting requests sent from the controller.
Chal
Access challenge. Number of responses from the RADIUS server containing a
challenge for the client (to complete authentication).
Ukn Rsp
Unknown Response code. Number of responses from the RADIUS server that
were not understood by the controller due to the purpose or type of the response
Tmout
Timeouts. Number of messages sent by the controller for which the controller did
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show aaa authentication-server radius | 748