Release Notes

Parameter Value
CA-Certificate
Name of the CA certificate
for client authentication
loaded in the controller.
Server-Certificate
Name of the Server
certificate used by the
controller to authenticate
itself to the client.
TLS Guest Access
Shows if guest access for
valid EAP-TLS users is
enabled or disabled.
TLS Guest Role
User role assigned to EAP-
TLS guest.
Ignore EAPOL-START after authentication
If enabled, the controller
ignores EAPOL-START
messages after
authentication.
Handle EAPOL-Logoff
Shows if handling of EAPOL-
LOGOFF messages is
enabled or disabled.
Ignore EAP ID during negotiation
If enabled, the controller will
Ignore EAP IDs during
negotiation.
WPA-Fast-Handover
Shows if WPA-fast-handover
is enabled or disabled. This
feature is only applicable for
phones that support WPA.
Disable rekey and reauthentication for clients on call
Shows if the rekey and
reauthentication features
for voice-over-WLAN clients
has been enabled or
disabled.
Check certificate common name against AAA server
If enabled, this parameter
verifies that the certificate's
common name exists in the
server. This parameter is
disabled by default dot1x
profiles.
Related Commands
Command Description Mode
aaa authentication dot1x
If you do not yet have any 802.1X
authentication profiles defined, use the
command aaa authentication dot1x to
configure your 802.1X profiles.
Config mode
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show aaa authentication dot1x | 714