Release Notes

aaa authentication-server ldap
aaa authentication-server ldap <server>
admin-dn <name>
admin-passwd <string>
allow-cleartext
authport <port>
base-dn <name>
clone <server>
enable
filter <filter>
host <ipaddr>
key-attribute <string>
max-connection <number>
no ...
preferred-conn-type ldap-s|start-tls|clear-text
timeout <seconds>
Description
This command configures an LDAP server.
Starting from ArubaOS 6.4, a maximum of 128 LDAP servers can be configured on the controller.
Syntax
Parameter Description Range Default
<server>
Name that identifies the server. — —
admin-dn <name>
Distinguished name for the admin user who
has read/search privileges across all of the
entries in the LDAP database (the user does
not need write privileges but should be able
to search the database and read attributes
of other users in the database).
— —
admin-passwd <string>
Password for the admin user. — —
allow-cleartext
Allows clear-text (unencrypted)
communication with the LDAP server.
enabled|
disabled
disabled
authport <port>
Port number used for authentication. Port
636 will be attempted for LDAP over SSL,
while port 389 will be attempted for SSL
over LDAP, Start TLS operation and clear
text.
1-65535 389
base-dn <name>
Distinguished Name of the node which
contains the entire user database to use.
— —
clone <server>
Name of an existing LDAP server
configuration from which parameter values
are copied.
— —
enable
Enables the LDAP server. —
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide aaa authentication-server ldap | 40