Release Notes

2071 | wlan ssid-profile Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Syntax
Description Range Default
<profile-name>
Name of this instance of the profile. The
name must be 1-63 characters.
“default”
902il-compatibility-mode
(For clients using NTT DoCoMo 902iL
phones only) When enabled, the
controller does not drop packets from
the client if a small or old initialization
vector value is received. (When TKIP or
AES is used for encryption and TSPEC is
enabled, the phone resets the value of
the initialization vector after add/delete
TSPEC.)
NOTE: This parameter requires the
PEFNG license.
disabled
a-basic-rates
List of supported 802.11a rates, in
Mbps, that are advertised in beacon
frames and probe responses.
6, 9, 12, 18,
24, 36, 48, 54
Mbps
6, 12, 24
Mbps
a-beacon-rate
Sets the beacon rate for 802.11a (use
for Distributed Antenna System (DAS)
only). Using this parameter in normal
operation may cause connectivity
problems.
default, 6, 9,
12,
18,24,36,48,54
Mbps
minimum
valid rate
a-tx-rates
Set of 802.11a rates at which the AP is
allowed to send data. The actual
transmit rate depends on what the client
is able to handle, based on information
sent at the time of association and on
the current error/loss rate of the client.
6, 9, 12, 18,
24, 36, 48, 54
Mbps
6, 9, 12, 18,
24, 36, 48, 54
Mbps
advertise-ap-name
If enabled, APs that are part of this VAP
willbroadcast the AP Name information in
the beacons frames.
advertise-location
If enabled, APs that are part of this VAP
will broadcast their GPS coordinates in
the beacons and probe response frames
as part of a vendor-specific Information
Element.
disabled
ageout
Time, in seconds, that a client is allowed
to remain idle before being aged out.
1000
seconds
battery-boost
Converts multicast traffic to unicast
before delivery to the client, thus
allowing you to set a longer DTIM
interval. The longer interval keeps
associated wireless clients from
activating their radios for multicast
indication and delivery, leaving them in
power-save mode longer and thus
lengthening battery life.
NOTE: This parameter requires the
PEFNG license. This parameter should
not be enabled if you plan on using the
disabled