Release Notes

1819 | show whitelist-db rap-master-switch-
list
Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Parameter Description
IP-Address
IP address of the mastercontroller.
Sequence Number
The number of times the mastercontroller in the whitelist received and
acknowledged a remote AP whitelist change from the local controller. In the
example above, the master controllers received and acknowledged three
remote AP whitelist changes sent from a local controller.
Remote Sequence Number
The number of times that the local controller has received and acknowledged
a remote AP whitelist change from the mastercontroller in the whitelist.
Null Update Count
The number of times the controller has checked its remote AP whitelist and
found nothing to synchronize with the remote controller. By default, the
controller compares its remote AP whitelist against whitelists on other
controllers every minute. If the null update count reaches 5, the controller will
send an “empty sync” heartbeat to the remote controller to ensure the
sequence numbers on both controllers are the same, then reset the null
update count to zero.
Related Commands
Command Description Mode
whitelist-db rap-local-switch-list
Delete a local controller from the local switch table
used by the remote AP whitelist
Config mode
whitelist-db rap del Remove an AP entry from the remote AP whitelist. Config mode
Command History
Version Modification
ArubaOS 6.3 Command introduced
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controllers