Release Notes

show vpdn l2tp configuration
show vpdn l2tp configuration
Description
Displays the VPN L2TP tunnel configuration.
Syntax
No parameters.
Example
The output of this command shows the L2TP tunnel configuration.
(host) # show vpdn l2tp configuration
Enabled
Hello timeout: 30 seconds
DNS primary server: 10.16.15.1
DNS secondary server: 10.16.14.1
WINS primary server: 0.0.0.0
WINS secondary server: 0.0.0.0
PPP client authentication methods:
PAP
IP LOCAL POOLS:
vpnpool: 10.16.15.150 - 10.16.15.160
Command History
This command was available in ArubaOS 3.0
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config or Enable mode on master or
local controllers
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show vpdn l2tp configuration | 1790