Release Notes

show user-table
show user-table
ap-group <ap-group>
ap-name <ap-name>
authentication-method dot1x|mac|opensystem|psk|stateful-dot1x|via-vpn|vpn|web
bssid <A:B:C:D:E:F>
devtype <device>
debug
essid <STRING>
internal
ip <A.B.C.D> [log] location b.f.l
mac <A:B:C:D:E:F> [log]
mobile {[bindings][visitors]}
name <STRING>
phy-type {[a]|[b]}
role <STRING>
rows <NUMBER> <NUMBER>
station
summary
unique
verbose
Description
Displays detailed information about the controller’s connection to a user device, in regards to mobility state
and statistics, authentication statistics, VLAN assignment method, AP datapath tunnel info, radius accounting
statistics, user name, user-role derivation method, datapath session flow entries, and 802.11 association state
and statistics. The show user command allows you to filter specific information by parameter.
Syntax
Parameter Description
ap-group <ap-group>
Filter the output of this command by showing users connected to APs
that belong to the specified AP group.
ap-name <ap-name>
Filter the output of this command by showing users connected to an AP
with the specified AP name.
authentication-method
Filter the output of this command by the authentication method used
for the device:
dot1x
Show data for devices using 802.1X authentication.
mac
Show data for devices using MAC authentication.
opensystem
Show data for devices using open (no) authentication.
psk
Show data for devices that do not use authentication but use a pre-
shared key for encryption.
stateful-dot1x
Show data for devices using stateful 802.1X authentication.
via-vpn
Show data for devices that authenticate using Dell VIA.
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show user-table | 1736