Release Notes

1691 | show switches Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
show switches
show switches [all | regulatory | state {complete | incomplete | inprogress | required} |
summary ]
Description
Displays the details of switches connected to the master controller, including the master controller itself.
Syntax
Parameter
Description
all
List of all switches.
regulatory
Displays information about the currently active regulatory file.
state
Configuration status of all switches.
summary
Status of all switches connected to the master.
Example
The output of this command shows that there is a single local controller connected to the master controller.
(host) # show switches all
All Switches
------------
IP Address Name Location Type Version Status Configuration State
Config Sync Time (sec)
---------- ---- -------- ---- ------- ------ -------------------
----------------------
10.16.12.1 r-wing-94 Building1.floor1 master 6.0.0.0_13782 up UPDATE SUCCESSFUL
0192.0.2.12 CorpA2400 Building1.floor1 master 6.0.0.0_13782 up UPDATE SUCCESSFUL
0
The output of the following command shows the regulatory file active on the controller.
(host) #show switches regulatory
All Switches
------------
IP Address Name Location Type Model File Version File Build
---------- ---- -------- ---- ----- ------------ ----------
172.16.0.254 host Building1.floor1 master W-7210 1.0_43859 21/4/2014