Release Notes

show esi ping
show esi ping [ping-name <ping-name>]
Description
Show settings for ESI ping health check attributes.
Syntax
Parameter Description
ping-name <ping-name>
Include the optional ping-name <ping-name> parameters to display settings
for one specified set of ping settings.
Example
This example below shows that the controller has three defined sets of ping attributes.
(host) #show esi groups
ESI Ping Table
--------------
Name Frequency (sec) Timeout (sec) Retry Count ID Num Groups
---- --------------- ------------- ----------- -- ----------
ping_att1 5 2 2 0 1
ESIping 5 2 2 1 0
ESIping2 50000 2 2 2 2
The output of this command includes the following information:
Column Description
Name
Name of a group of ping settings.
frequency
Specifies the ping frequency in seconds.
timeout
Specifies the ping timeout in seconds.
retry-count
Specifies the ping retry count
ID
ID number assigned to the ping attributes when that set of attributes was defined.
Num Groups
Number of ESI groups to which this set of ping attributes is assigned.
Related Commands
Platforms Licensing Command Mode
esi ping This command specifies the ESI
ping health check configuration.
Config mode on master or local
controllers.
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show esi ping | 1292