Release Notes

show esi parser
show esi parser domains|rules|stats
Description
Show ESI parser information.
Syntax
Parameter Description
domains
Show ESI parser domain information.
rules
Show ESI parser rule information.
stats
Show ESI parser rule stats.
Usage Guidelines
The ESI parser is a generic syslog parser on the controller that accepts syslog messages from external third-
party appliances such as anti-virus gateways, content filters, and intrusion detection systems. It processes
syslog messages according to user-defined rules and takes configurable actions on the corresponding system
users.
ESI servers are configured into domains to which ESI syslog parser rules are applied.
Use the showesiparserdomains command to show ESI parser domain information.
Example
The ESI Parser Domain table in the example below shows that the controller has two ESI domains and two ESI
servers.
(host) #show esi parser domains
ESI Parser Domain Table
-----------------------
Domain ESI Servers Peer Controllers
------ ----------- ----------------
corp_domain 172.21.5.50 10.3.132.14
remote_domain 192.84.66.30
Total number of servers configured: 2
Related Commands
Platforms Licensing Command Mode
esi parser domain This command configures an ESI
syslog parser domain.
Config mode on master or local
controllers.
esi parser rule This command creates or changes
an ESI syslog parser rule.
Config mode on master or local
controllers.
esi parser rule-test This command allows you to test
all of the enabled parser rules.
Config mode on master or local
controllers.
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show esi parser | 1290