Release Notes

1261 | show datapath Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
C - Prohibit new calls, P - Permanent, m - Convert multicast, n - Convert RAs to unicast(VLAN
Pooling/L3 Mobility enabled),
V - enforce user vlan(open clients only)
H - Standby (HA-Lite)
# Source Destination Prt Type MTU VLAN OVLAN Acls BSSID
Decaps Encaps Heartbeats Flags
------ ------------- -------------------- --- ---- ---- ---- ----- -------------- --------
--------- --------- --------- ----------- -----
16 2046:eab::25 2047:eab::25 47 0 1280 0 0 0 0 0
00:00:00:00:00:00 119209 25535 28873 TEFPR
The following example displays a partial list of crypto parameter statistics.
(host) (config) #show datapath crypto counters
Datapath Crypto Statistics
--------------------------
Crypto Accelerator Present
Crypto Cores In Use 1
Crypto Cores Total 4
Crypto Requests Total 16
Crypto Requests Queued 0
Crypto Requests Failed 0
Crypto Timeouts 0
Crypto NoCoreFree 0
Crypto BadNPlus 0
Crypto SendNPlusFailed 0
IPSec Encryption Failures 0
IPSec Decryption Failures 0
IPSec Decryption Loops 0
IPSec Decryption BufFail 0
IPSec Decr SPI(client) ERR 0
IPSec Decrypt SA Not Ready 0
IPSec Frag Failures 0
IPSec Bad Pad Length 0
IPSec Invalid TCP Index 0
IPSec Invalid Length 0
IPSec Invalid Head-Room 0
IPSec Invalid Protocol 0
PPTP Encryption Failures 0
PPTP Decryption Failures 0
WEP Encryption Failures 0
WEP Decryption Failures 0
WEP No Key (not serious) 0
TKIP Encryptions 0
TKIP Encryption Failures 0
TKIP Decryptions 0
TKIP Decryption Failures 0
TKIP MIC Failures 0
TKIP Decrypt Bad Counter 0
TKIP P1Key Not Ready 0
...
The following parameters appear in the output of the show datapath crypto counters command, and are
useful for debugging purposes.
Parameter Description
Crypto BadNPlus
Indicates a queue overrun in the output of the encryption circuit.