Release Notes

1253 | show datapath Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Parameter Description
eap counters
EAP termination statistics are displayed.
eth1info
Displays IPv4 fragment table statistics.
memory
Displays SOS memory statistics.
opcode
Displays datapath debugging information.
NOTE: Use this command only under the supervision of Dell technical
support.
performance all
Displays datapath debug performance statistics including the
SUM/CPU, addr, and description.
<id>
Displays datapath performance counters by specified CPU ID display.
counters
Displays datapath performance counters.
event-guide
Displays :
l COP0 Events
l L3 Cache Events
l NAE-RX Events
l NAE-TX Events (by register index 0-4)
verbose
Displays debug performance statistics including: SUM/CPU, addr,
description, value, and difference from last show.
dhcp
Datapath DHCP -related information.
dpi application <appid>
Displays the Deep Packet Inspection application default ports.
error
Datapath error statistic errors.
counters
Show datapath errors including SUM, CPU, Addr and description inform-
ation.
esi table
Displays the contents of the datapath ESI server table entries
including server, IP, MAC, destination, VLAN, type, session and flag
information.
exthdr
Displays the datapath default IPv6 Extended Header Map.
firewall-agg-sess
Displays the datapath firewall aggregated sessions table.
counters
Displays the datapath aggregate session statistics.
fqdn
Displays datapath FQDN entries.
frame counters
Displays frame statistics that are received and transmitted from the
data path of the controller.
Several output fields include the following descriptions:
l Descr failures-This is the number of times a packet descriptor
was not available and the packet dropped.
l Dot1QDiscards-The number of packets received on a trunk port
where the VLAN presented did not match any configured on the