Release Notes

1187 | show ap wired-ap-profile Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
show ap wired-ap-profile
show ap wired-ap-profile [<profile>]
Description
Show a list of all wired AP profiles, or display the configuration parameters in a specific wired AP profile.
Syntax
Parameter Description
<profile>
Name of a wired AP profile.
Usage Guidelines
The command show ap wired-ap-profile displays a list of all wired AP profiles, including the number of
references to each profile and the profile status. If you include the optional <profile> parameter, the command
will display detailed information for that one profile.
Example
The output of this command shows the configuration parameters for the wired AP profile “default”.
(host) #show ap wired-ap-profile default
Wired AP profile "default"
--------------------------
Parameter Value
--------- -----
Wired AP enable Disabled
Forward mode tunnel
Switchport mode access
Access mode VLAN 1
Trunk mode native VLAN 1
Trunk mode allowed VLANs 1-4094
Trusted Not Trusted
Broadcast Broadcast
The output of this command includes the following information:
Column Description
Wired AP enable
Indicates whether the wired AP profile is enabled or disabled.
Forward mode
The configured forward mode for the profile.
l bridge: Bridge locally
l split-tunnel: Tunnel to controller or NAT locally
l tunnel: Tunnel to controller
Switchport mode
The profile’s switching mode.
l access: Set access mode characteristics of the interface.
l mode: Set trunking mode of the interface.
l trunk: Set trunk mode characteristics of the interface.
Access mode VLAN
VLAN ID of the access mode VLAN.