Release Notes

Range for 80 MHz: 29.3 - 1300.0 Mbps
The output of this command includes the following information:
Column Description
MCS
A Modulation Coding Scheme (MCS) values supported on this high-throughput SSID.
Streams
Number of spatial streams used by the MCS index value.
20 MHz
802.11n data rates for the MCS for 20 Mhz transmissions.
20 MHz SGI
802.11n data rates for the MCS for 20 Mhz transmissions using a short guard interval.
40 MHz
802.11n data rates for the MCS for 40 Mhz transmissions.
40 MHz SGI
802.11n data rates for the MCS for 40 Mhz transmissions using a short guard interval.
80 MHz
802.11n data rates for the MCS for 80 Mhz transmissions.
80 MHz SGI
802.11n data rates for the MCS for 80 Mhz transmissions using a short guard interval.
Related Commands
Command Description
show ap ht-rates
Show high-throughput rate information for a basic service set (BSS).
Command History
Introduced in ArubaOS 6.3.
Command Information
Platforms Licensing Command Mode
This command will only show
rate information for
802.11ac-capable APs
Base operating system Enable or Config mode on master
controllers
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show ap vht-rates | 1182