Release Notes

Parameter Description
Uplink VLAN
If you configured an uplink VLAN on an AP connected to a port in
trunk mode, the AP sends and receives frames tagged with this VLAN
on its Ethernet uplink.
By default, an AP has an uplink vlan of 0, which disables this feature.
Usage Guidelines
The AP provisioning profile allows you to define a set of provisioning parameters to an AP group. These
settings can be saved or assigned to an AP group via the command ap-group <group> provisioning-profile
<profile>.
Related Commands
Command Description
provision-ap
Change provisioning parameters for an individual AP. This command does
not save the provisioning parameters settings in a reusable profile.
Command History
Release Modification
ArubaOS 3.0 Command introduced
ArubaOS 6.0 The uplink-vlan parameter was introduced.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controllers
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show ap provisioning-profile | 1106