Release Notes

show ap debug spanning-tree
show ap debug spanning-tree {ap-group <ap-group>|ap-name <ap-name>|bssid <bssid>|ip-addr <ip-
addr>}
Description
Show an AP’s spanning tree statistics.
Syntax
Parameter Description
ap-name <ap-name>
Show log information for an AP with a specific name.
bssid <bssid>
Show log information for a specific Basic Service Set Identifier (BSSID). The
Basic Service Set Identifier (BSSID) is usually the AP’s MAC address.
ip-addr<ip-addr>
Show log information for an AP with a specific IP address by entering an IP
address in dotted-decimal format.
ip6-addr<ip6-addr>
Show log information for an AP with a specific IPv6 address by entering an IPv6
address in dotted-decimal format.
Example
The following command shows the .....................................
(host) #show ap debug spanning-tree
Command History
This command was introduced in ArubaOS 3.0
Release Modification
ArubaOS 6.3 Command introduced
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master
controllers
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show ap debug spanning-tree | 1014