Reference Guide

Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide show ids general-profile | 889
show ids general-profile
show ids general-profile <profile-name>
Description
Display an IDS General profile.
Syntax
Usage Guidelines
Issue this command without the <profile-name> parameter to display the IDS General profile list. Include a
profile name to display detailed configuration information for that profile.
Examples
The example below shows that the controller has four configured General profiles.
In the example above, the Reference column indicates the number of references to the profile named in the
Name column. The Profile Status column is blank unless the rule is predefined.
The example below displays the settings for the profile helen.
Parameter Description
<profile-name> Name of an IDS General profile.
((host) (config) # show ids general-profile
IDS General Profile List
------------------------
Name References Profile Status
---- ---------- --------------
default 2
helen 0
wired-lb 1
Wizard-test2 1
Total:4
(host) (config) #show ids general-profile helen
IDS General Profile "helen"
---------------------------
Parameter Value
--------- -----
Stats Update Interval 60 sec
Monitored Device Stats Update Interval 0 sec
AP Inactivity Timeout 20 sec
Adhoc (IBSS) AP Inactivity Timeout 5 sec
AP Max Unseen Timeout 600 sec
Adhoc AP Max Unseen Timeout 180 sec
STA Inactivity Timeout 60 sec
STA Max Unseen Timeout 600 sec
Min Potential AP Beacon Rate 25 %
Min Potential AP Monitor Time 2 sec
Signature Quiet Time 900 sec
Wireless Containment deauth-only
Debug Wireless Containment false
Wired Containment false
Wired Containment of AP's Adj MACs false
Mobility Manager RTLS false
IDS Event Generation on AP none
Send Adhoc Info to Controller true