Reference Guide

Dell PowerConnect W-Series ArubaOS 6.1 CLI | Reference Guide ip mobile active-domain | 317
ip mobile active-domain
ip mobile
ip mobile active-domain <name>
Description
This command configures the mobility domain that is active on the controller.
Syntax
Usage Guidelines
All controllers are initially part of the “default” mobility domain. If you use the “default” mobility domain, you do
not need to specify this domain as the active domain on the controller. However, once you assign a controller to a
user-defined domain, the “default” mobility domain is no longer an active domain on the controller.
Example
The following command assigns the controller to a user-defined mobility domain:
(host) (config) #ip mobile active-domain campus1
Command History
This command was available in ArubaOS 3.0.
Command Information
Parameter Description
active-domain Name of the mobility domain.
Platform License Command Mode
Available on all platforms Available in the base operating system Config mode on master controllers