Setup guide

4. Close the display and turn the computer upside down on a flat work surface.

5. Disconnect your computer and all attached devices from their electrical outlets.

6. Remove the main battery:
a. Unlock the battery by sliding the battery-lock latch towards the outer edge.
b. Slide the battery-bay release latch and hold it.
c. Remove the battery from the battery bay.

7. Press the power button to ground the system board.
Back to Contents Page

NOTICE: To avoid damaging the system board, you must remove the main battery before you service the computer.
NOTICE: To avoid damage to the computer, use only the battery designed for this particular Dell computer. Do not use batteries designed for other Dell
computers.
1
battery-lock latch
2
battery-bay release latch
3
battery

