Owners Manual
Table Of Contents
- Working inside your computer
- Disassembly and reassembly
- Drivers and downloads
- System setup
- Troubleshooting
- Getting help and contacting Dell
Steps
1. Ensure that the release lever on the processor socket is fully extended in the open position.
2. Align the notches on the processor with the tabs on the processor socket and place the processor in the processor socket.
CAUTION: Ensure that the processor-cover notch is positioned underneath the alignment post.
3. When the processor is fully seated in the socket, pivot the release-lever down and place it under the tab on the processor
cover.
Next steps
1. Install the heatsink assembly.
2. Install the side cover.
3. Follow the procedure in After working inside your computer.
Disassembly and reassembly
39