Owners Manual

Installing the power switch

1 Insert the power switch into the slot from the front of the computer and press it until it clicks into place.

2 Align the cable with the pins on the connector and connect the cable.

3 Close the front panel door.

4 Install the:

a bezel

b cover

5 Follow the procedure in After working inside your computer.

Coin cell battery

Removing the coin cell battery

1 Follow the procedure in Before working inside your computer.

2 Remove the:

a cover

b bezel

3 Open the front panel door.

4 To remove the coin cell battery:

a Press the release latch until the coin cell battery pops out.

b Remove the coin cell battery from the connector on the system board.

Removing and installing components