Owners Manual

4 To remove the optical drive bracket:

a Remove the M2L2 screws that secure the optical drive bracket to the optical drive.

b Remove the optical drive bracket from the optical drive.

Installing the optical drive assembly

1 Place the optical drive bracket on the optical drive.

2 Tighten the M2L2 screws to secure the optical drive bracket to the optical drive.

3 Insert the optical drive assembly into the optical drive bay.

4 Tighten the 6-32xL3.6 screw to secure the optical drive assembly to the computer.

5 Open the front panel door.

6 Route the data cable and power cable under the drive cage.

7 Connect the data cable and power cable to the connectors on the optical drive assembly .

8 Close the front panel door.

9 Install the:

a bezel

b cover

10 Follow the procedure in After working inside your computer.

Removing and installing components