Owners Manual

6. Remove the SSD

7. Remove the display assembly

8. Remove the power button board

Steps

1. Disconnect and route the power adapter cable from the system board [1, 2].

2. Remove the single (M2x3) screw that secures the power adapter port to the palmrest and keyboard assembly [3].

3. Lift the power adapter port, along with its cable, off the palmrest and keyboard assembly [4].

Installing the power adapter port

Steps

1. Place the power adapter port into the slot on the palmrest and keyboard assembly [1].

2. Replace the single (M2x3) screw that secures the power adapter port to the palmrest and keyboard assembly [2].

3. Route the power adapter cable through the routing channels [3].

4. Connect the power adapter cable to the system board [4].

Scoaterea şi instalarea componentelor