Owners Manual

Ventilator sistem

Removing the system fan

Prerequisites

1. Follow the procedure in before working inside your computer

2. Remove the SD memory card

3. Remove the base cover

4. Disconnect the battery cable from the connector on the system board.

Steps

1. Disconnect the display cable and fan cable from the system board [1, 2].

Unroute the display cable from the routing guides on the fan [1].

3. Remove the three (M2.5x5) screws that secure the fan to the palmrest and keyboard board assembly [1].

4. Lift the fan off the palmrest and keyboard board assembly [2].

Scoaterea şi instalarea componentelor