Owners Manual

Next steps

1. Replace the hard drive assembly

2. Replace the battery

3. Replace the base cover

4. Replace the optical drive assembly

5. Replace the SD memory card

6. Follow the procedure in after working inside your computer

Touchpad

Removing the touch pad assembly

Prerequisites

1. Follow the procedure in before working inside your computer

2. Remove the SD memory card

3. Remove the optical drive assembly

4. Remove the base cover

5. Remove the battery

Steps

1. Open the latch and disconnect the hard drive cable and touch pad cable from the system board [1, 2].

2. Peel the tape that secures the touch pad to the palmrest and keyboard assembly [3].

Scoaterea şi instalarea componentelor