Owners Manual

Installing the heatsink

Steps

1. Place the heatsink on the system board and align the screw holes on the heatsink with the screw holes on the system board [1].

2. In sequential order (as indicated on the heatsink), tighten the four captive screws that secure the heatsink to the system board [2].

Next steps

1. Connect the battery cable to the connector on the system board.

2. Replace the battery

3. Replace the base cover

4. Replace the SD memory card

5. Follow the procedure in after working inside your computer

Removing the heatsink

Prerequisites

1. Follow the procedure in before working inside your computer

2. Remove the SD memory card

3. Remove the optical drive assembly

4. Remove the base cover

5. Disconnect the battery cable from the connector on the system board.

Steps

1. Loosen the four captive screws that secure the heatsink to the system board [1].

NOTE: Loosen the screws in the order of the callout numbers [1, 2, 3, 4] as indicated on the heatsink.

2. Remove the three (M2x3) screws that secure the heatsink to the system board [2].

3. Lift the heatsink off the system board [3].

Scoaterea şi instalarea componentelor