Owners Manual

Next steps

1. Connect the battery cable to the connector on the system board.

2. Replace the base cover

3. Replace the optical drive assembly

4. Replace the SD memory card

5. Follow the procedure in after working inside your computer

Hard disk

Removing the hard drive assembly

Prerequisites

1. Follow the procedure in before working inside your computer

2. Remove the SD memory card

3. Remove the optical drive assembly

4. Remove the base cover

5. Remove the battery

Steps

1. Lift the latch and disconnect the hard drive cable from the system board [1].

2. Remove the four (M2x3) screws that secure the hard drive assembly to the palm rest and keyboard assembly [2].

3. Lift the hard drive assembly along with its cable off the palm rest and keyboard assembly [3].

Scoaterea şi instalarea componentelor