Owners Manual
Installing the Battery
1. Insert the battery into its slot until it clicks into place.
2. Follow the procedures in After Working Inside Your computer .
Removing the Optical-disk Drive
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the battery.
3. Perform the following steps as shown in the illustration:
a. Remove the screw that secures the optical-disk drive (ODD) to the computer [1].
b. Press on the tab indicated using a scribe [2].
c. Slide the ODD out of the computer [3].
Installing the Optical-disk Drive
1. Insert the ODD into its slot until it clicks into place.
2. Tighten the screw to secure the ODD.
3. Install the battery.
4. Follow the procedures in After Working Inside Your computer .
Removing the Access Panel
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove battery.
3. Perform the following steps as shown in the illustration:
a. Remove the screws that secure the access panel to the computer [1].
b. Lift the access panel partially at a 45–degree angle [2].
9