Dell Vostro 1540/1550 Eigenaarshandleiding Regelgevingsmodel P18F Regelgevingstype P18F001,P18F002
Opmerkingen, voorzorgsmaatregelen, en waarschuwingen OPMERKING: Een OPMERKING duidt belangrijke informatie aan voor een beter gebruik van de computer. WAARSCHUWING: VOORZICHTIG geeft aan dat er schade aan hardware of potentieel gegevensverlies kan optreden als de instructies niet worden opgevolgd. GEVAAR: EEN WAARSCHUWING duidt op een risico van schade aan eigendommen, lichamelijk letsel of overlijden. De informatie in dit document kan zonder voorafgaande kennisgeving worden gewijzigd. © 2011 Dell Inc.
Inhoudsopgave Opmerkingen, voorzorgsmaatregelen, en waarschuwingen.................2 Hoofdstuk 1: Aan de computer werken.....................................................7 Voordat u in de computer gaat werken.............................................................................7 Aanbevolen hulpmiddelen.................................................................................................9 Uw computer uitschakelen............................................................................
Hoofdstuk 9: De aan/uit-knopkaart verwijderen....................................27 De aan/uit-knopkaart installeren.....................................................................................28 Hoofdstuk 10: De vaste schijf verwijderen..............................................31 De vaste schijf installeren...............................................................................................32 Hoofdstuk 11: De WLAN-kaart verwijderen............................................
Hoofdstuk 20: De gelijkspanningsingangspoort en de beugel verwijderen..................................................................................................57 De gelijkspanningsingangspoort en beugel installeren..................................................59 Hoofdstuk 21: Het montagekader van het beeldscherm verwijderen..................................................................................................61 Het montagekader van het beeldscherm installeren.........................
Aan de computer werken 1 Voordat u in de computer gaat werken Volg de onderstaande veiligheidsrichtlijnen om uw eigen veiligheid te garanderen en de computer tegen mogelijke schade te beschermen. Tenzij anders aangegeven, wordt er bij elke procedure in dit document van de volgende veronderstellingen uitgegaan: • • • U hebt de stappen uitgevoerd in Aan de computer werken. U hebt de veiligheidsinformatie geraadpleegd die bij uw computer is geleverd.
WAARSCHUWING: Verwijder kabels door aan de stekker of aan de kabelontlastingslus te trekken en niet aan de kabel zelf. Sommige kabels zijn voorzien van een connector met borglippen. Als u dit type kabel loskoppelt, moet u de borglippen ingedrukt houden voordat u de kabel verwijdert. Trek connectors in een rechte lijn uit elkaar om te voorkomen dat connectorpinnen verbuigen. Ook moet u voordat u een kabel verbindt, controleren of beide connectors op juiste wijze zijn opgesteld en uitgelijnd.
WAARSCHUWING: Raak onderdelen pas aan nadat u zich hebt geaard door een ongeverfd metalen oppervlak van de behuizing aan te raken, zoals het metaal rondom de openingen voor de kaarten aan de achterkant van de computer. Raak tijdens het werken aan uw computer af en toe een ongeverfd metalen oppervlak aan om eventuele statische elektriciteit, die schadelijk kan zijn voor interne componenten, te ontladen. 11. Verwijder alle geïnstalleerde ExpressCards of smartcards uit de desbetreffende sleuven.
aangesloten apparaten niet automatisch worden uitgeschakeld wanneer u het besturingssysteem afsluit. Nadat u aan de computer hebt gewerkt Nadat u onderdelen hebt vervangen of geplaatst, moet u controleren of u alle externe apparaten, kaarten, kabels etc. hebt aangesloten voordat u de computer inschakelt. WAARSCHUWING: U voorkomt schade aan de computer door alleen de batterij te gebruiken die voor deze specifieke Dell-computer is ontworpen.
De batterij verwijderen 1. 2. Volg de procedures in Voordat u binnen de computer gaat werken. Schuif de vergrendelingslipjes opzij om de batterij te ontgrendelen. 3. Verschuif de batterij en verwijder deze uit de computer.
De batterij plaatsen 1. 2. 12 Schuif de batterij in de sleuf totdat deze vastklikt. Volg de procedures in Nadat u aan de computer hebt gewerkt.
De SD-kaart verwijderen 1. 2. Volg de procedures in Voordat u binnen de computer gaat werken. Druk op de SD-geheugenkaart om deze uit de computer te verwijderen. 3. Schuif de geheugenkaart uit de computer.
De SD-kaart installeren 1. 2. 14 Duw de geheugenkaart in het compartiment totdat deze volledig is vastgeklikt. Volg de procedures in Nadat u aan de computer hebt gewerkt.
De scharnierkap verwijderen 1. 2. 3. Volg de procedures in Voordat u binnen de computer gaat werken. Verwijder de batterij. Verwijder de schroeven waarmee de scharnierkap is bevestigd. 4. Draai de computer om en verwijder de scharnierkap.
De scharnierkap installeren 1. 2. 3. 4. 16 Installeer de scharnierkap en druk erop om deze met de computer te bevestigen. Draai de computer om en installeer de schroeven waarmee de scharnierkap wordt bevestigd. Plaats de batterij. Volg de procedures in Nadat u aan de computer hebt gewerkt.
Het toetsenbord verwijderen 1. Volg de procedures in Voordat u binnen de computer gaat werken. 2. Verwijder de batterij. 3. Wrik het omhoog om de bovenste vier lipjes vrij te geven waarmee het toetsenbord aan de computer is bevestigd. 4. Draai het toetsenbord om en plaats het op de polssteun. 5. Koppel de toetsenbordkabel los van de systeemkaart.
6. Verwijder het toetsenbord van de computer. Het toetsenbord installeren 1. 2. 3. 4. Sluit de toetsenbordkabel aan op de systeemkaart. Plaats het toetsenbord met een hoek van 30 graden in het compartiment. Druk het toetsenbord omlaag om de bovenste lipjes vast te klikken. Plaats de batterij. 5. Volg de procedures in Nadat u aan de computer hebt gewerkt.
Het optische station verwijderen 1. Volg de procedures in Voordat u binnen de computer gaat werken. 2. Verwijder de batterij. 3. Verwijder het toetsenbord. 4. Verwijder de schroef waarmee het optische station is bevestigd. 5. Gebruik een schroevendraaier om het optische station voorzichtig uit de computer te wrikken.
Het optische station installeren 1. 2. 3. 4. 5. 20 Schuif het optische station in het compartiment aan de linkerkant van het chassis. Draai de schroef vast waarmee het optische station op de computer wordt bevestigd. Plaats het toetsenbord. Plaats de batterij. Volg de procedures in Nadat u aan de computer hebt gewerkt.
De geheugenmodule verwijderen 1. Volg de procedures in Voordat u binnen de computer gaat werken. 2. Verwijder de batterij. 3. Verwijder het toetsenbord. 4. Duw de borgklemmen van de geheugenmodule naar buiten totdat de module loskomt. 5. Verwijder de geheugenmodule uit de computer.
De geheugenmodule installeren 1. 2. 3. 4. 5. 22 Plaats de geheugenmodule in de geheugensocket. Druk de geheugenmodule omlaag totdat deze met de borgklemmen wordt vastgeklikt. Plaats het toetsenbord. Plaats de batterij. Volg de procedures in Nadat u aan de computer hebt gewerkt.
De polssteun verwijderen 1. Volg de procedures in Voordat u binnen de computer gaat werken. 2. Verwijder de batterij. 3. Verwijder het toetsenbord. 4. Verwijder de schroeven waarmee de onderplaat is bevestigd. 5. Draai de computer om en koppel de stroomkaartkabel (1) en de touchpadkabel (2) los.
6. Verwijder de schroeven waarmee de polssteun aan de computer is bevestigd. 7. Wrik de polssteun met een plastic pennetje los om alle lipjes aan de onder-, linker- en rechterkant van de polssteun vrij te geven. Wanneer alle lipjes zijn vrijgegeven, verwijdert u de polssteun uit de computer. De polssteun installeren 1. Plaats de polssteun richting het beeldscherm met een hoek van 30 graden. 2. Lijn de polssteun uit voordat u deze omlaag drukt om alle lipjes vast te klikken. 3.
4. 5. 6. 7. 8. Installeer de schroeven waarmee de polssteun op de computer wordt bevestigd. Draai de computer om en installeer de schroeven waarmee de onderplaat wordt bevestigd. Plaats het toetsenbord. Plaats de batterij. Volg de procedures in Nadat u aan de computer hebt gewerkt.
De aan/uit-knopkaart verwijderen 1. 2. 3. Volg de procedures in Voordat u binnen de computer gaat werken. Verwijder de batterij. Verwijder het toetsenbord. 4. 5. Verwijder de polssteun. Verwijder het plakband van de aan/uit-knopkaart waarmee deze aan de polssteun is bevestigd. 6. Draai de polssteun om en verwijder de schroef waarmee de aan/uitknopkaart aan de polssteun is bevestigd.
7. Til de aan/uit-knopkaart omhoog en verwijder de bijbehorende kabel via de opening. De aan/uit-knopkaart installeren 1. Steek de kabel van de aan/uit-knopkaart door de opening. 2. Bevestig de aan/uit-knopkaart aan het bijbehorende compartiment. 3. Installeer de schroef waarmee de aan/uit-knopkaart wordt bevestigd. 4. Draai de computer om en sluit de kabel van de aan/uit-knop aan op de polssteun. 5. Installeer de polssteun. 6. Plaats het toetsenbord. 7. Plaats de batterij.
8. Volg de procedures in Nadat u aan de computer hebt gewerkt.
De vaste schijf verwijderen 10 1. 2. 3. Volg de procedures in Voordat u binnen de computer gaat werken. Verwijder de batterij. Verwijder het toetsenbord. 4. 5. Verwijder de polssteun. Verschuif de vaste schijf en til deze uit de computer. 6. Verwijder de schroeven waarmee de vasteschijfbeugel is bevestigd en koppel deze los van de vaste schijf.
De vaste schijf installeren 1. 2. 3. 4. 5. 6. 7. 32 Installeer de vasteschijfbeugel op de vaste schijf. Draai de schroeven vast waarmee de vasteschijfbeugel wordt bevestigd. Plaats de vaste schijf in het bijbehorende compartiment en schuif deze richting de SATA-connector om deze aan de systeemkaart te bevestigen. Plaats de polssteun. Plaats het toetsenbord. Plaats de batterij. Volg de procedures in Nadat u aan de computer hebt gewerkt.
De WLAN-kaart verwijderen 1. 2. 3. Volg de procedures in Voordat u binnen de computer gaat werken. Verwijder de batterij. Verwijder het toetsenbord. 4. 5. Verwijder de polssteun. Koppel alle antennes los die aan de WLAN-kaart zijn bevestigd. 6. Wrik de vergrendeling los om de WLAN-kaart los te maken van het compartiment.
7. Verwijder de WLAN-kaart uit de computer. De WLAN-kaart installeren 1. Schuif de WLAN-kaart in de sleuf. 2. Klem de WLAN-kaart op de vergrendeling om deze te bevestigen. 3. Sluit de antennes aan volgens de kleurcode op de WLAN-kaart. 4. Plaats de polssteun. 5. Plaats het toetsenbord. 6. Plaats de batterij. 7. Volg de procedures in Nadat u aan de computer hebt gewerkt.
De knoopcelbatterij verwijderen 1. Volg de procedures in Voordat u binnen de computer gaat werken. 2. Verwijder de batterij. 3. Verwijder het toetsenbord. 4. Verwijder de polssteun. 5. Verwijder de kabel van de knoopcelbatterij uit de systeemkaart. 6. Verwijder de knoopcelbatterij uit de computer.
De knoopcelbatterij plaatsen 1. 2. 3. 4. 5. 6. 36 Plaats de knoopcelbatterij in het bijbehorende compartiment. Sluit de kabel van de knoopcelbatterij op de systeemkaart aan. Plaats de polssteun. Plaats het toetsenbord. Plaats de batterij. Volg de procedures in Nadat u aan de computer hebt gewerkt.
De USB-kaart verwijderen 1. 2. 3. Volg de procedures in Voordat u binnen de computer gaat werken. Verwijder de batterij. Verwijder het toetsenbord. 4. 5. 6. Verwijder het optische station. Verwijder de polssteun. Koppel de USB-kaartkabel los van de systeemkaart. 7. Verwijder de schroef waarmee de USB-kaart is bevestigd.
8. Til de USB-kaart omhoog en verwijder deze uit de computer. De USB-kaart installeren 1. Plaats de USB-kaart in het compartiment op de computer en lijn deze uit. 2. Plaats de schroef waarmee de USB-kaart wordt bevestigd. 3. Sluit de USB-kaartkabel aan op de systeemkaart. 4. Plaats de polssteun. 5. Installeer het optische station. 6. Plaats het toetsenbord. 7. Plaats de batterij. 8. Volg de procedures in Nadat u aan de computer hebt gewerkt.
De microfoon verwijderen 1. Volg de procedures in Voordat u binnen de computer gaat werken. 2. Verwijder de batterij. 3. Verwijder het toetsenbord. 4. Verwijder de polssteun. 5. Koppel de microfoonkabel los van de systeemkaart. 6. Til de microfoon omhoog en verwijder deze uit het compartiment.
De microfoon installeren 1. 2. 3. 4. 5. 6. 40 Plaats de microfoon in het compartiment en lijn deze uit. Sluit de microfoonkabel aan op de systeemkaart. Plaats de polssteun. Plaats het toetsenbord. Plaats de batterij. Volg de procedures in Nadat u aan de computer hebt gewerkt.
De processorventilator en de warmteafleider verwijderen 15 1. 2. 3. 4. 5. Volg de procedures in Voordat u binnen de computer gaat werken. Verwijder de batterij. Verwijder het toetsenbord. Verwijder de polssteun. Koppel de processorventilator los van de systeemkaart. 6. Verwijder de geborgde schroeven waarmee de warmteafleider en processorventilator zijn bevestigd aan de hand van de volgorde in de afbeelding.
7. Verwijder de warmteafleider en de processorventilator uit de computer. De processorventilator en de warmteafleider installeren 1. Lijn de warmteafleider en processorventilator uit en plaats ze. 2. Draai de geborgde schroeven vast waarmee de warmteafleider en de processorventilator worden bevestigd. 3. Sluit de kabel van de processorventilator aan op de systeemkaart. 4. Installeer de polssteun. 5. Plaats het toetsenbord. 6. Plaats de batterij. 7.
De processor verwijderen 1. 2. 3. Volg de procedures in Voordat u binnen de computer gaat werken. Verwijder de batterij. Verwijder het toetsenbord. 4. 5. 6. Verwijder de polssteun. Verwijder de processorventilator en de warmteafleider. Draai de sluitnok van de processor linksom. 7. Til de processor omhoog en verwijder deze uit de computer.
De processor installeren 1. 2. 3. 4. 5. 6. 7. 44 Plaats de processor in de processoraansluiting. Controleer of de processor goed is geplaatst. Draai de sluitschroef rechtsom in de vergrendelde positie. Installeer de processorventilator en de warmteafleider. Plaats de polssteun. Plaats het toetsenbord. Plaats de batterij. Volg de procedures in Nadat u aan de computer hebt gewerkt.
De systeemkaart verwijderen 1. Volg de procedures in Voordat u binnen de computer gaat werken. 2. Verwijder de batterij. 3. Verwijder de SD-geheugenkaart. 4. Verwijder het toetsenbord. 5. Verwijder het optische station. 6. Verwijder de geheugenmodule. 7. Verwijder de polssteun. 8. Verwijder de vaste schijf. 9. Verwijder de WLAN-kaart. 17 10. Verwijder de processorventilator en de warmteafleider. 11.
13. Til de systeemkaart met een hoek omhoog en schuif deze uit de LAN-, VGA-, HDMI- en USB-sockets. De systeemkaart installeren 1. Plaats de systeemkaart met de LAN-, VGA-, HDMI- en USB-connectors in de respectieve sockets en lijn de systeemkaart uit. 2. Installeer de schroeven waarmee de systeemkaart wordt bevestigd. 3. Sluit de LCD-kabel, de gelijkspanningsingangskabel, de USB-kaartkabel, de geluidskaartkabel, de knoopcelbatterijkabel en de luidsprekerkabel aan. 4. Installeer de processor. 5.
8. 9. 10. 11. 12. 13. 14. Installeer de polssteun. Installeer de geheugenmodule. Installeer het optische station. Plaats het toetsenbord. Installeer de SD-geheugenkaart. Plaats de batterij. Volg de procedures in Nadat u aan de computer hebt gewerkt.
De luidsprekers verwijderen 1. Volg de procedures in Voordat u binnen de computer gaat werken. 2. Verwijder de batterij. 3. Verwijder de SD-geheugenkaart. 4. Verwijder het toetsenbord. 5. Verwijder het optische station. 6. Verwijder de geheugenmodule. 7. Verwijder de polssteun. 8. Verwijder de vaste schijf. 9. Verwijder de WLAN-kaart. 18 10. Verwijder de processorventilator en de warmteafleider. 11. Verwijder de systeemkaart. 12. Haal de luidsprekerkabel uit de geleiders. 13.
14. Druk op de vergrendelingen en til de rechterluidspreker omhoog. 15. Verwijder de luidsprekers en de luidsprekerkabel uit de computer.
De luidsprekers installeren 1. 2. 3. 4. 5. 6. Plaats de linker- en rechterluidspreker in hun respectieve compartimenten en bevestig ze. Plaats de luidsprekerkabel in de geleider in het chassis en lijn deze uit. Plaats de systeemkaart. Installeer de processor. Installeer de processorventilator en de warmteafleider. Installeer de WLAN-kaart. 7. 8. 9. 10. 11. 12. 13. 14. Installeer de vaste schijf. Installeer de polssteun. Installeer de geheugenmodule. Installeer het optische station.
Het beeldscherm verwijderen 19 1. 2. 3. Volg de procedures in Voordat u binnen de computer gaat werken. Verwijder de batterij. Verwijder de scharnierkap. 4. 5. 6. Verwijder het toetsenbord. Verwijder de polssteun. Koppel de LVDS-kabel los van de systeemkaart. 7. Koppel de WLAN-antennes los en verwijder deze uit de geleiders op het chassis.
8. Verwijder de schroeven waarmee de linker- en rechterscharnier zijn bevestigd. 9. Til het beeldscherm uit de computer en verwijder deze.
Het beeldscherm installeren 1. 2. 3. 4. 5. 6. Plaats de beeldschermscharnieren in de bijbehorende houders. Installeer de schroeven waarmee beide scharnieren worden bevestigd. Sluit de LVDS-kabel aan op de systeemkaart. Plaats de kabel van de WLAN-antennes in de houder en sluit de antennes aan op de WLAN-kaart. Sluit de USB-kaartkabel aan. Plaats de polssteun. 7. 8. 9. 10. Plaats het toetsenbord. Installeer de scharnierkap. Plaats de batterij. Volg de procedures in Nadat u aan de computer hebt gewerkt.
20 De gelijkspanningsingangspoort en de beugel verwijderen 1. 2. 3. 4. 5. 6. 7. Volg de procedures in Voordat u binnen de computer gaat werken. Verwijder de batterij. Verwijder de scharnierkap. Verwijder het toetsenbord. Verwijder de polssteun. Verwijder het beeldscherm. Koppel de gelijkspanningskabel los van de systeemkaart. 8. Verwijder de schroef waarmee de gelijkspanningsingangspoort is bevestigd.
9. Til de beugel van de gelijkspanningsingangspoort omhoog. 10. Verwijder de gelijkspanningsingangspoort uit de computer.
De gelijkspanningsingangspoort en beugel installeren 1. 2. 5. Plaats de gelijkspanningsingangspoort en de beugel in het compartiment. Lijn de beugel uit en draai de schroef vast waarmee de beugel en gelijkspanningsingangspoort worden bevestigd. Sluit de gelijkspanningskabel aan op de systeemkaart. Plaats het beeldscherm. Installeer de polssteun. 6. 7. 8. 9. Plaats het toetsenbord. Installeer de scharnierkap. Plaats de batterij. Volg de procedures in Nadat u aan de computer hebt gewerkt. 3. 4.
Het montagekader van het beeldscherm verwijderen 21 1. 2. 3. Volg de procedures in Voordat u binnen de computer gaat werken. Verwijder de batterij. Wrik het montagekader van het beeldscherm van binnen naar buiten los, beginnend aan de onderkant, en werk naar de rechter- en linkerhoeken van het montagekader toe. 4. Verwijder het montagekader van het beeldscherm nadat alle lipjes zijn vrijgegeven.
Het montagekader van het beeldscherm installeren 1. 2. 3. 4. 62 Lijn het montagekader van het beeldscherm uit met de bovenkap. Druk het montagekader van het beeldscherm omlaag beginnend aan de onderrand om het kader met de lipjes vast te klikken. Plaats de batterij. Volg de procedures in Nadat u aan de computer hebt gewerkt.
De camera verwijderen 1. Volg de procedures in Voordat u binnen de computer gaat werken. 2. Verwijder de batterij. 3. Verwijder het montagekader. 4. Koppel de camerakabel los van de cameramodule. 5. Wrik de vergrendeling los, til de camera omhoog en verwijder deze.
De camera installeren 1. 2. 3. 4. 5. 64 Plaats de cameramodule in het compartiment en lijn deze uit. Sluit de camerakabel aan op de cameramodule. Plaats het montagekader van het beeldscherm. Plaats de batterij. Volg de procedures in Nadat u aan de computer hebt gewerkt.
23 Het beeldschermpaneel verwijderen 1. 2. 3. Volg de procedures in Voordat u binnen de computer gaat werken. Verwijder de batterij. Verwijder de scharnierkap. 4. 5. 6. 7. 8. Verwijder het toetsenbord. Verwijder de polssteun. Verwijder het beeldscherm. Verwijder het montagekader. Koppel de camerakabel los van de cameramodule. 9. Verwijder de schroeven waarmee de beeldschermbeugels en -scharnieren zijn bevestigd.
10. Maak de draadloze antennes los van de rechterscharnier. 11. Koppel de LVDS-kabel los van de linkerscharnier.
12. Verwijder het beeldschermpaneel en de beugels van de beeldschermkap. 13. Verwijder de schroeven van de linker- en rechterbeugels van het beeldscherm en verwijder het beeldschermpaneel. Het beeldschermpaneel installeren 1. Bevestig de linker- en rechterbeugels op het beeldschermpaneel en draai de schroeven vast. 2. Plaats de beeldschermkabel en draadloze antennes in de linker- en rechterscharnieren. 3. Lijn het beeldschermpaneel met de beugels uit met de bovenkap. 4.
5. 6. 7. 8. 9. 10. 11. 12. 13. 68 Installeer de schroeven waarmee het beeldschermpaneel en de beugels worden bevestigd. Sluit de camerakabel aan op de cameramodule. Plaats het montagekader van het beeldscherm. Plaats het beeldscherm. Plaats de polssteun. Plaats het toetsenbord. Installeer de scharnierkap. Plaats de batterij. Volg de procedures in Nadat u aan de computer hebt gewerkt.
De LVDS-kabel verwijderen 1. Volg de procedures in Voordat u binnen de computer gaat werken. 2. Verwijder de batterij. 3. Verwijder de scharnierkap. 4. Verwijder het toetsenbord. 5. Verwijder het optische station. 6. Verwijder de polssteun. 7. Verwijder het beeldscherm. 8. Verwijder het montagekader. 9. Verwijder het beeldschermpaneel. 24 10. Verwijder de tape waarmee de LVDS-kabelaansluiting is bevestigd. 11. Koppel de LVDS-kabel los van het beeldschermpaneel.
12. Verwijder de volledige beeldschermkabel van de kleefstof waarmee deze aan het beeldschermpaneel is bevestigd. De LVDS-kabel installeren 1. Sluit de beeldschermkabel aan op het beeldschermpaneel. 2. Sluit de beeldschermkabelconnector aan op het beeldschermpaneel en maak deze met de tape vast. 3. Plaats het beeldschermpaneel. 4. Plaats het montagekader van het beeldscherm. 5. Plaats het beeldscherm. 6. Installeer de polssteun. 7. Installeer het optische station.
8. 9. 10. 11. Plaats het toetsenbord. Installeer de scharnierkap. Plaats de batterij. Volg de procedures in Nadat u aan de computer hebt gewerkt.
System Setup openen 1. 2. 3. 25 Zet de computer aan of start deze opnieuw op. Wacht tot de F2-prompt wordt weergegeven wanneer het blauwe DELLlogo wordt weergegeven. Druk onmiddellijk op als de F2-prompt verschijnt. OPMERKING: De F2-prompt duidt erop dat het toetsenbord is geïnitialiseerd. Deze prompt kan zeer snel verschijnen. Wees dus op het verschijnen ervan beducht en druk op . Als u te vroeg op drukt, wordt deze toetsaanslag niet geregistreerd. 4.
System Setup-schermen Menu Verschijnt boven aan het venster System Setup. Dit veld biedt een menu met System Setup-opties. Druk op < Pijl naar links > en < Pijl naar rechts > om te bladeren. Wanneer een van de menuopties is geselecteerd, geeft de lijst Options (Opties) de opties weer die de geïnstalleerde hardware op uw computer definiëren. Options List (Lijst Opties) Verschijnt boven aan het venster System Setup. Dit veld biedt een menu met System Setup-opties.
Toetsaanslag Actie – of + Hiermee wijzigt u de bestaande itemwaarde. < Enter > Hiermee selecteert u het submenu of voert u de opdracht uit. < F9 > Hiermee laadt u de standaardinstelling. < F10 > Hiermee slaat u de huidige configuratie op en sluit u System Setup af. Opties voor System Setup Algemeen Systeeminformatie (System Information) Geeft het nummer van het computermodel weer. System Date (Systeemdatum) Stelt de datum op de interne agenda van de computer opnieuw in.
Extended Memory (Uitgebreide geheugen) Geeft het geïnstalleerde geheugen op de computer weer. System Memory (Systeemgeheugen) Geeft het ingebouwde geheugen op de computer weer. Memory Speed (Geheugensnelheid) Geeft de geheugensnelheid weer. Gefixeerde vaste schijf Geeft het modelnummer en de capaciteit van de vaste schijf weer. SATA ODD Geeft het modelnummer en de capaciteit van het optische station weer. Netadaptertype Geeft het type van de netadapter weer.
Functietoetsgedrag Geeft het gedrag op van de functietoets . Standaard: Functietoets eerst Charger Behavior (Ladergedrag) Geeft aan of de computerbatterij wordt geladen wanneer deze is aangesloten op een stroombron. Standaard: Ingeschakeld Miscellaneous devices (Diverse apparaten) Met deze velden kunt u diverse ingebouwde apparaten in- of uitschakelen. Beveiliging Serviceplaatje instellen Dit veld geeft het serviceplaatje van het systeem weer.
USB Storage Device (USBopslagapparaat) Geeft op via welk USB-opslagapparaat de computer kan opstarten. CD/DVD-ROM-schijven Geeft aan via welke cd/dvd de computer kan opstarten. Netwerk Geeft op via welk netwerkapparaat de computer kan opstarten. Exit (Afsluiten) Met deze sectie kunt u standaardinstellingen opslaan, weggooien en laden voordat u afsluit via System Setup.
Diagnostische pieptooncodes 26 De computer kan een reeks pieptonen afgeven tijdens het opstarten als het beeldscherm geen fouten of problemen kan weergeven. Deze reeks pieptonen, die pieptooncodes wordt genoemd, geven verschillende problemen aan. De vertraging tussen elk piepje is 300 ms; de vertraging tussen elke reeks piepjes is 3 sec; het piepje zelf duurt 300 ms. Na elk piepje en elke reeks piepjes moet het BIOS waarnemen of de gebruiker de aan/uit-knop indrukt.
Batterijstatuslampjes Als de computer is aangesloten op een stopcontact, werkt het batterijlampje als volgt: • • • • • Afwisselend oranje en wit knipperend lampje — Er is een niet geverifieerde of ondersteunde netadapter aan de laptop gekoppeld die niet van Dell is. Lampje dat afwisselend oranje knippert en wit brandt — Tijdelijke batterijstoring met netadapter aanwezig. Oranje knipperend lampje — Batterijstoring met netadapter aanwezig.
27 Specificaties OPMERKING: Aanbiedingen kunnen per regio verschillen. De volgende specificaties zijn alleen de specificaties die wettelijk verplicht moeten worden meegeleverd bij de computer. Voor meer informatie over de configuratie van uw computer klikt u op Start → Help en ondersteuning en selecteert u de optie om informatie over uw computer weer te geven.
Audio (Geluidskaart) Type 2.
Camera Cameraresolutie 1,3 megapixels Videoresolutie 640 x 480 bij 30 fps (maximum) Communicatie Netwerkadapter 10/100/1000 Mbps Ethernet-LAN Draadloos interne WLAN-kaart Poorten en aansluitingen Audio (Geluidskaart) één microfoonconnector, één connector voor stereohoofdtelefoon/luidsprekers Video • • Netwerkadapter één RJ-45-connector USB drie 4-pins connectors, geschikt voor USB 2.
Beeldscherm Breedte 344,20 mm Diagonaal 396,24 mm Actief gedeelte (X/Y) 344,23 mm x 193,54 mm Maximale resolutie 1366 x 768 bij 262K kleuren Maximale helderheid 220 nits Werkingshoek 0° (gesloten) tot 140° Vernieuwingsfrequentie 60 Hz Minimale gezichtshoeken: Horizontaal 40/40 Verticaal 15/30 (H/L) Pixelpitch: 0,23 mm x 0,23 mm Toetsenbord Aantal toetsen: Verenigde Staten en Canada: 86 toetsen, Europa en Brazilië: 87 toetsen, Japan: 90 toetsen Touchpad Actief gedeelte: X-as 90 mm Y-a
Batterij Oplaadtijd ongeveer 4 uur (wanneer de computer is uitgeschakeld) Spanning 11,1 V gelijkstroom Temperatuurbereik: In bedrijf 0 °C tot 35 °C Niet in bedrijf –40 °C tot 65 °C Knoopcelbatterij CR2032-lithiumknoopcelbatterij van 3 V Netadapter Type: Vostro 1440/Vostro 1450/Vostro 1540/Vostro 1550 met ingebouwde videokaart 65 W Vostro 1440 met discrete videokaart 65 W Vostro 1450 met discrete videokaart 90 W Ingangsspanning 100 V wisselstroom tot 240 V wisselstroom Ingangsstroom (maximu
Netadapter Temperatuurbereik: In bedrijf 0 °C tot 40 °C Niet in bedrijf –40 °C tot 70 °C Fysiek Vostro 1440 / Vostro 1450: Hoogte (met een WLED-paneel) 31,50 mm tot 34,70 mm Breedte 342 mm Diepte 244 mm Gewicht (minimum) 2,2 kg Vostro 1540 / Vostro 1550: Hoogte (met een WLED-paneel) 31,50 mm tot 34,50 mm Breedte 376 mm Diepte 260 mm Gewicht (minimum) 2,37 kg Omgeving Temperatuur: In bedrijf 0 °C tot 35 °C Opslag –40 °C tot 65 °C Relatieve vochtigheid (maximum): In bedrijf 10% tot 90
Contact opnemen met Dell 28 OPMERKING: Als u geen actieve internetverbinding hebt, kunt u de contactgegevens vinden op de factuur, de pakbon of in de productcatalogus van Dell. Dell biedt diverse online en telefonische ondersteunings- en servicemogelijkheden. De beschikbaarheid verschilt per land en product en sommige services zijn mogelijk niet beschikbaar in uw regio. Wanneer u met Dell contact wilt opnemen voor vragen over de verkoop, technische ondersteuning of de klantenservice: 1. 2. 3. 4.