Operation Manual

Installing the Battery

1. Insert the battery into the battery slot and press to lock in place.

2. Follow the procedures in After Working Inside Your computer.

Removing the Optical Drive

1. Follow the procedures in Before Working Inside Your Computer.

2. Remove the battery.

3. Perform the following steps as shown in the illustration:

a. Remove the screw that secures the optical-disk drive (ODD) to the computer [1].

b. Press the tab indicated using a scribe [2].

c. Slide the ODD out of the computer [3].

Installing the Optical Drive

1. Slide the optical drive into the computer.

2. Tighten the screw to secure the optical drive.

3. Install the battery.

4. Follow the procedures in After Working Inside Your computer.

Removing the Access Panel

1. Follow the procedures in Before Working Inside Your Computer.

2. Remove the battery.

3. Perform the following steps as shown in the illustration:

a. Remove the screws that secure the access panel to the computer [1].

b. Lift the access panel away from the computer [2].