User guide

Supervision 62
CRITICAL A serious problem occurred on the UPS device. This problem requires an urgent action.
Your application might NOT BE powered.
Critical Event List (UPSs, PDUs, Applications, Generic devices):
• The UPS output is off
• The outlet group 1 is off
• The outlet group 2 is off
• Battery fault
• UPS overload
• UPS fault
• Low battery alarm
• Applications must stop immediately...
• System shutdown in progress...
• Critical alarm (a generic Critical alarm is active on the device)
PDU Critical Event List (Specific to PDUs):
• The input frequency is out of range
• The input temperature is above high threshold
• The input temperature is below low threshold
• The input voltage is above high threshold
• The input voltage is below low threshold
• The input {x} is overload
• The section {x} current is too high
• The section {x} current is too low
• The section {x} voltage is too high
• The section {x} voltage is too low
• The outlet group {x} current is too high
• The outlet group {x} current is too low
• The outlet group {x} is overload
• The outlet group {x} is off
• The phase {x} output is overload
• The output frequency is out of range
• The output is overload
• The output voltage is above high threshold
• The output voltage is below low threshold
0119_2-Dell MUMC UG.book Page 62 Saturday, November 2, 2013 4:59 PM