Users Guide

Supervision 68
• IP address: The Web/SNMP card IP address (if network acquisition)
• Mac address: The Web/SNMP card Mac address (if network acquisition)
• Location: The device location (value of syslocation object or can also be configured in the Device
page)
• Contact: The device contact (value of syscontact object or can also be configured in the Device page)
• Serial Number: The device Serial Number (if available)
• Link: Link to the device Web site (if available)
• Battery state: Charging / Discharging / Default / Floating / Resting
• Power source: AC Power / Battery
• Load Level: The output load level of the device
• Battery capacity: Battery capacity of the device
• Battery run time: The device remaining backup time
• Master Output: Main output status (ON/OFF/Internal Failure/On Automatic Bypass/Manual By
Pass/Overload)
• Group #x: Output outlet status (ON/OFF)
NOTE: The information displayed in this panel depends on the UPS capabilities.
Environment Panel
This panel displays the selected device sensor information (see Figure 52):
• Temperature sensor: Temperature (in °C)
•
Humidity: Humidity level
•
Input #1: Status of first contact (open / closed)
•
Input #2: Status of second contact (open / closed)
Figure 52. Environment Panel
0120_3-Dell ULNM UG.book Page 68 Saturday, November 2, 2013 5:34 PM