Users Guide

Configuration 43
Figure 25. Dell UPS Management Card Web Interface
Use Case 2
To save battery backup time, you want to stop all your computers after a predefined time.
• On the Dell Network Management Card, configure a Shutdown Criteria.
– The Dell Network Management Card shutdown configurations are available from
UPS > Shutdown Configuration .
NOTE: In this case, the computer automatic restart is guaranteed.
Use Case 3
You want to perform load shedding on the specific computer hosting Dell ULNM#2. You want to stop
the computer hosting Dell ULNM#2 after a predefined time.
•On Dell ULNM #2, configure a Shutdown Timer value.
– This configuration parameter is available from
Settings > Shutdown > Edit Shutdown Configuration .
NOTE: In this case, the automatic restart for the computer hosting Dell ULNM #2 is not guaranteed.
NOTE: Use Case 3 can be combined with Use Case 1 or Use Case 2.
0120_3-Dell ULNM UG.book Page 43 Saturday, November 2, 2013 5:34 PM