Users Guide

Installation 23
Installing/Uninstalling the Dell ULNM (Command Line)
You can install or uninstall the product from a command line in order to deploy the software in a group,
with or without using the graphical interface. This method also provides the ability to configure
protection settings from the command line.
• Detail of available command options can be obtained using command:
– <packageName> -help
– <packageName> [COMMAND] [OPTION]...
• The available commands are:
– -install Launches the installation/upgrade process (default).
– -uninstall Launches the process to uninstall the application.
• The available options are:
– -debug Displays debugging information on the console.
– -silent Install the application silently.
• Access the installation folder:
– -dir <installPath>
• Power source settings can be provided with:
-sdn <login>:<password>@<address>,<loadSegment>,
<shutdownDuration>,<shutdownTimer>,<shutoffControl>
Example
To install Dell ULNM silently in C:\Program Files\MyFolder:
<packageName> -install -silent -dir "C:\Program Files\MyFolder"
-sdn admin:admin@192.168.100.101,1,120,-1,1
Dell ULNM installs with shutdown feature parameters
• Power source: 192.168.100.101
• Login: admin
• Password: admin
• Load segment: 1 (Master)
• Shutdown duration: 120 seconds
• Shutdown timer: -1 (None)
• Shutoff control: 1 (Enabled)
After the installation is completed, open a Web browser with the following URL:
http://<host>:4679/,
where <host> is the host name or IP address of the machine hosting Dell ULNM.
0120_3-Dell ULNM UG.book Page 23 Saturday, November 2, 2013 5:34 PM