Users Guide

Installation 15
For x86-64 architectures, on Windows system, the Dell ULNM will work in 32-bit compatibility mode,
which implies no native ports for these architectures will be made for these systems except for
components that strictly require it, such as device drivers.
On all supported platforms, the Dell ULNM will run as a service and will automatically start at system
boot up as soon as required system services (essentially network) are up.
For the installation in these specific virtual environments, please refer to the user manual appendix that
describes the procedures for those environments.
The Linux package is based on standard Linux mechanisms and therefore can be installed and used with
other Linux distributions. Feedbacks / test or bug reports are welcome at Dell support.
Note that the list in is not exhaustive, but that the Dell ULNM should be compatible with the
architectures listed in Table 5.
Ubuntu
®
12.10 •
•
12.04 LTS •
•
11.10 •
•
10.04 LTS •
•
Virtual Environments
VMware
®
ESXi 5.1 (pay version only) —
•
ESXi 5.0 (pay version only) U1 —
•
ESXi 4.1 (pay version only) U2 —
•
ESX 4.0 (pay version only) U4 —
•
Microsoft HyperV™ Windows Hyper-V Server 2012 —
•
Windows Hyper-V Server 2008 R2 —
•
Windows Hyper-V Server 2008 —
•
Xen
®
Citrix XenServer 6.0 •
•
Citrix XenServer 5.6 •
•
OpenSource Xen 2.6 on RHEL 5 —
•
OpenSource Xen 3.2 on Debian 5 —
•
KVM KVM 0.12.1.2 on RHEL 6 and Debian 5 —
•
Operating System Service Pack Type of Message Platform
x86 x64
0120_3-Dell ULNM UG.book Page 15 Saturday, November 2, 2013 5:34 PM