Owner's Manual
Table Of Contents
- User’s Guide
- Getting Started With Dell Update Packages
- Using Dell Update Packages
- Performing BIOS and Firmware Updates Using Dell Linux Online Repository
- Update and Rollback in Unified Server Configurator - Lifecycle Controller Enabled
- Command Line Interface Reference
- Linux Troubleshooting
- Known Issues
- Diagnostic Tasks Will Not Run While a DUP Reboot is Pending
- Abnormal Termination of a DUP
- Error While Loading Shared Libraries
- Insufficient Free Physical Memory to Load the BIOS Image
- Kernel Panic While Running Storage Controller Firmware Update Packages
- Loss of Functionality While Renaming Linux DUPs
- Yum and Up2date Repository Management Software Caches Incorrect Repository Metadata
- Use Dell Linux Repository with yum and Red Hat Enterprise Linux Version 4
- DUPs Fail on 64-bit Red Hat Enterprise Linux Operating System
- DUP Update of Firmware Might Fail While Running in the UEFI Mode
- Messages
- DUP Message Logs
- Known Issues
- Windows Troubleshooting and FAQs
- Index
50 Linux Troubleshooting
Rebuilding Package Failed -
Server Administrator device
driver (HAPI) is already
installed on the system.
Package can be rebuilt only on
a system that does not have
Server Administrator device
driver (HAPI) installed.
Packages cannot be rebuilt on a system
that has the HAPI device driver
installed.
Unable to Install Dell
Instrumentation Driver (HAPI).
The package cannot install the HAPI
driver.
Rebuilding Package Failed -
RPM Installation failed with
error code=<RPM Install Error
Return code>
Provides the RPM error code that
prevented the package from being
rebuilt.
packagename.bin: Rebuilding
Package failed - Unable to
extract package contents.
Ensure that there is enough space in the
/tmp directory.
packagename.bin: Rebuilding
Package - Kernel <kernel-
version> is already supported
by this package.
You do not need to rebuild this package
because you have already customized
the package for your kernel. You will
only receive this message if you
previously used the --rebuild option
and then ran the rebuilt package.
packagename.bin: Rebuilding
Package Failed - RPM
Installation failed with error
code=<LSB_Compliant RPM
Install Error Return code>
Check the LSB Compliant RPM error
return codes to determine the exact
reason for failure.
packagename.bin: Rebuilding
Package Failed - Error
creating driver support
directory.
Ensure that enough space is available in
the /tmp directory.
packagename.bin: Rebuilding
Package Failed - Error copying
kernel modules.
Ensure that enough space is available in
the /tmp directory.
Table 6-1. Messages
Message Description/Solution