Users Guide

24  │  About Your Monitor
Plug and Play Capability
You can install the monitor in any Plug and Play-compatible system. The monitor
automatically provides the computer system with its Extended Display Identification
Data (EDID) using Display Data Channel (DDC) protocols so the system can
configure itself and optimize the monitor settings. Most monitor installations are
automatic; you can select different settings if desired. For more information about
changing the monitor settings, see
Operating the Monitor.
Universal Serial Bus (USB) Interface
This section gives you information about the USB ports that are available on the
monitor.
NOTE: This monitor is Super-Speed USB 3.2 compatible.
* Up to 2A on USB downstream port (port with battery icon) with BC1.2
compliance devices or normal USB devices.
NOTE: USB Type-C video requires a Type-C Alternate Mode capability
computer.
NOTE: To support USB Type-C Alternate Mode, please ensure the
Source computer has Alternate Mode capability.
Transfer Speed Data Rate Power Consumption*
Super-speed 10 Gbps 4.5 W (Max, each port)
High speed 480 Mbps 4.5 W (Max, each port)
Full speed 12 Mbps 4.5 W (Max, each port)
Thunderbolt™ 3/
USB Type-C
Description
Video DP1.2 (Passive cable)
DP1.4 (Active cable)
Data USB 2.0
USB 3.2 (Active, Thunderbolt™ 3 only)
Power Delivery (PD) Thunderbolt™ 3 Upstream port: Up to 90 W (typical)
Thunderbolt™ 3 Downstream port: Up to 15 W (typical)