Users Guide
Table Of Contents
- Safety Instructions
- About Your Monitor
- Setting Up the Monitor
- Connecting the Stand
- Using the Tilt, Swivel, and Vertical Extension
- Rotating the Display
- Configuring the Display Settings on Your Computer after Rotation
- Organizing Your Cables
- Connecting Your Monitor
- Dell Power Button Sync (DPBS) (U2722DE Only)
- Securing Your Monitor Using Kensington Lock (Optional)
- Removing the Monitor Stand
- Wall Mounting (Optional)
- Operating the Monitor
- Troubleshooting
- Appendix
Operating the Monitor | 85
If either DP, HDMI or USB-C input is selected and the corresponding cable is not
connected, a floating dialog box as shown below appears.
No DP Cable
The display will go into Standby Mode in 4 minutes.
www.dell.com/U2722D/DX/DE
or
No HDMI Cable
The display will go into Standby Mode in 4 minutes.
www.dell.com/U2722D/DX/DE
or
(U2722DE Only)
No USB-C Cable
The display will go into Standby Mode in 4 minutes.
www.dell.com/U2722D/DX/DE
See Troubleshooting for more information.