Users Guide
Table Of Contents
- Safety Instructions
- About Your Monitor
- Setting Up the Monitor
- Connecting the Stand
- Using the Tilt, Swivel, and Vertical Extension
- Rotating the Display
- Configuring the Display Settings on Your Computer after Rotation
- Organizing Your Cables
- Connecting Your Monitor
- Dell Power Button Sync (DPBS) (U2722DE Only)
- Securing Your Monitor Using Kensington Lock (Optional)
- Removing the Monitor Stand
- Wall Mounting (Optional)
- Operating the Monitor
- Troubleshooting
- Appendix
58 | Setting Up the Monitor
Removing the Monitor Stand
CAUTION: To prevent scratches on the LCD screen when removing the
stand,ensure that the monitor is placed on a soft, clean surface.
NOTE: The following instructions are applicable only for the stand that
was shipped with your monitor. If you are connecting a stand that you
purchased from any other source, follow the set up instructions that were
included with the stand.
To Remove the Stand:
1. Place the monitor on a soft cloth or cushion.
2. Press and hold the stand-release button.
3. Lift the stand up and away from the monitor.
2
3