User's Manual

NOTE: Limited data is collected from the iDRAC7 source.

Zero FootPrint Report Collection

Example 1: To collect software and hardware information silently and save it in the specified location, run the following

command:

• On systems running Windows: Dell_DSET_3.4.0.x.exe REPORTNAME=<NAME>

COLLECT=<hw,sw> /qn

• On systems running Linux: dell-dset-lx(bit)-(Version_Number).bin –qn -d <hw,sw> -

r<reportname>

Viewing DSET Report

You can view the hardware, storage, and software data in the generated report using the GUI. The logs and advanced

log information are available in the log files located in the logs folder (part of the .zip file).

To view the report:

• On systems running Windows, unzip the .zip file using the password ’dell’.

• On systems running Linux, copy the .zip file to Windows system and unzip the file using the password ’dell’.

After you unzip, read the ReadmeFirst.txt file for instructions to view the report.