Owners Manual

Figure 28. Connect Power Cables to the Power Supplies

1 Left power supply 2 Right power supply

2 Secure each power cable to the expansion enclosure using the strain relief clamp.

3 Connect the power cables plugged into the left power supply to one PDU.

4 Connect the power cables plugged into the right power supply to a second PDU.

5 Label both ends of the power cords to identify the power supply and PDU to which each power cord is connected.

Install the Front Bezel

If a front bezel is shipped with the SCv360 expansion enclosure, install the bezel on the front of the expansion enclosure.

1 Align the bezel with the front of the expansion enclosure.

2 Press the two latches on front of bezel.

SCv360 Expansion Enclosure Installation