Reference Guide

Species a world wide name (WWN) of the local port by which to lter the display. (The –localport option is deprecated on Storage
Center 5.0 and later.)
–lun integer
Species a logical unit number (LUN) by which to lter the display.
–remoteport string
Species the world wide name (WWN) of the remote port by which to lter the display.
–serialnumber string
Species the volume serial number by which to lter the display. (Available only when running on operating systems that expose serial
numbers to the user.)
–server string
Species a server name by which to lter the display. Names that contain spaces must be enclosed in single quotes.
–serverindex string
Species the index of the server by which to lter the display.
–txt filename
Species a txt le in which to save output.
–volume string
Species a volume name by which to lter the display. Names that contain spaces must be enclosed in single quotes.
–volumeindex string
Species a volume index by which to lter the display.
–xml filename
Species an xml le in which to save output.
Output
For each Storage Center server, the following volume mapping information is output to the console in table format.
Output
Description
Server Index Shows server index.
Server Shows server name.
Volume Index Shows volume index.
Volume Shows the volume name.
DeviceID Shows the volume device ID.
SerialNumber Shows the volume serial number.
LocalPort Shows the world wide name (WWN) of the local port to which the volume is mapped.
RemotePort Shows the world wide name (WWN) of the remote port to which the volume is mapped.
LUN Shows the logical unit number (LUN) for the mapped volume.
36 Command Reference